Door locks, card and biometric readers, boom barriers and multi-door management systems for offices, gated societies and commercial premises across Dehradun — with fail-safe and fail-secure configuration handled correctly for every door, including fire-exit routes.
⚡ Quick Answer
SR Solution fits access control in Dehradun from around ₹5,000 for a single-door system, with boom barriers for vehicle gates typically ₹25,000 to ₹60,000. The site visit is free, fail-safe vs fail-secure configuration is confirmed per door, and equipment is genuine eSSL, ZKTeco, Matrix or Anviz. Call +91 78179 50541 to arrange a visit.
✦ What comes up most often
At a Glance
| Coverage | Offices, gated societies, warehouses and commercial premises across Dehradun |
| Doors & gates fitted | 180+ since 2018 |
| Typical response | Same-day to next-day site visit |
| Starting price | ₹5,000 for a single-door card or fingerprint system |
| Boom barrier price | ₹25,000 – ₹60,000 depending on barrier length |
| Install duration | A few hours for a single door; longer for multi-door systems |
| Equipment used | eSSL, ZKTeco, Matrix, Anviz |
| Power-cut behaviour | Configured per door — fail-safe, fail-secure, or battery backup |
| Rating | 4.6 / 5 average |
| Hours | Monday–Saturday, 7:00 AM – 9:00 PM |
The Basics
Access control is the physical hardware and credential system that restricts who can open a specific door, gate or barrier — distinct from CCTV, which records what happens, and from biometric attendance, which logs staff hours for payroll. A single fingerprint reader can sometimes do both attendance and access control, but the two purposes are handled as separate configurations even on shared hardware.
Main entrances, server rooms, store rooms holding valuable stock, and vehicle gates for offices or gated societies are the areas where access control earns its cost most clearly — anywhere a shared physical key becomes a genuine liability once too many copies exist or someone leaves the organisation.
Whether a door is fail-safe or fail-secure isn't a minor technical footnote — getting this wrong on a fire-exit route is a real safety and compliance issue. Every door gets this confirmed specifically rather than defaulting to whichever configuration is easiest to install.
Understanding the Hardware
The vocabulary worth knowing before a site visit.
Hold a door shut with magnetic force — simple and reliable, but always fail-safe by design, meaning they unlock if power is cut. Suited to doors where an automatic unlock during a power failure is acceptable or required.
Replace part of the standard door frame and can be configured as either fail-safe or fail-secure, offering more flexibility than an electromagnetic lock for doors with specific security or compliance requirements.
Tap-to-unlock, straightforward to issue and revoke, and the most common credential for offices and gated societies. Can be lost or shared, which is where pairing with CCTV at the same door adds real value.
Vehicle gate arms for parking and society entrances, typically paired with an RFID card or number-plate recognition — a genuinely different hardware category from a door lock, priced and installed separately.
Who This Is For
Before You Buy
① Fail-Safe vs Fail-Secure Isn't Optional
A fire-exit door configured fail-secure by mistake stays locked during a power cut — a genuine safety issue, not just an inconvenience. This is checked specifically per door rather than applying one default setting across an entire building.
② Match the Credential to the User
A card is quick but can be lost or shared; a PIN needs no hardware to lose but can be guessed or shared verbally; biometric is hardest to share but costs more per reader. Many systems support combining methods — a card as default with a PIN backup — worth discussing based on the actual users.
| Credential | Trade-off |
|---|---|
| Card / fob | Fast, but can be lost or shared |
| PIN | No hardware needed, but can be shared verbally |
| Biometric | Hardest to share, higher cost per reader |
③ Pair With CCTV Where It Matters
A card can be shared or a PIN passed along — pairing access control with CCTV at the same door means an unlock event can be cross-referenced with footage of who actually used it, which matters most at higher-value entry points like a server room or cash office.
④ Boom Barriers Are a Separate Conversation
Boom barriers involve different hardware, different installation considerations (barrier arm length, traffic flow, RFID range) and a meaningfully higher price point than a door lock — best discussed as its own item during the site visit rather than assumed to be a simple add-on.
Related Services
All available from a single visit alongside an access control installation.
Camera coverage at access-controlled doors for a cross-referenced audit trail.
DetailsThe same fingerprint or face reader can also log staff hours for payroll.
DetailsVisual visitor confirmation as a complement to card or biometric entry.
DetailsAnnual plans covering lock, reader and software servicing — particularly important on fire-exit doors.
DetailsWhat Things Cost
Final cost depends on door count, credential type and hardware — confirmed after a free site visit.
| System type | Typical setup | Price range |
|---|---|---|
| Single-door card system | One reader, one lock, basic setup | ₹5,000 – ₹10,000 |
| Single-door biometric system | Fingerprint reader + lock | ₹8,000 – ₹15,000 |
| Multi-door system | Several doors, centralised software | ₹18,000 – ₹35,000 |
| Boom barrier (vehicle gate) | Barrier arm + RFID or plate recognition | ₹25,000 – ₹60,000 |
| Visitor management add-on | Temporary credential issuing system | ₹10,000 – ₹20,000 |
| Annual Maintenance Contract | Lock, reader and software servicing | From ₹3,000/year |
* Figures are indicative as of 2025 and include standard installation. A written, itemised quote follows the free site visit.
How It Works
Most single-door installations are completed within a few hours.
Call or WhatsApp with the number of doors or gates, and what's actually being protected.
A technician assesses each door specifically, including fail-safe/fail-secure requirements for any fire-exit route.
An itemised quote follows, covering lock hardware, credentials and any multi-door software needed.
Locks, readers and wiring are fitted, tested per door, and configured according to each door's specific requirements.
Staff or residents are enrolled with cards, PINs or biometric credentials as agreed.
Admin access and permission settings are set up and tested before the technician leaves.
Worth Comparing
| Feature | SR Solution ✦ | Typical vendor |
|---|---|---|
| Fail-safe/fail-secure confirmed per door | ✔ Always | ✘ Often assumed |
| Site visit cost | ✔ Free | ✘ Often charged |
| Boom barrier expertise | ✔ Genuine | ✘ Often outsourced |
| Branded equipment only | ✔ | ✘ Sometimes unbranded |
| Written, itemised quote | ✔ Always | ✘ Verbal estimate |
| AMC available | ✔ Yes | ✘ Rarely offered |
In Their Words
4.6 out of 5, from clients across Dehradun.
"They caught that our fire-exit door was going to be fail-secure by default and flagged it before installation. Would never have known to ask about that myself."
"Boom barrier for our society's parking gate, with RFID cards for residents. Handles the traffic at peak hours without issue."
"Paired our server room lock with a camera at the same door. Good peace of mind knowing exactly who used which card and when."
Questions That Come Up
General questions about access control systems in Dehradun.
Lead Installation Technician, SR Solution
Sandeep has spent the last seven years fitting access control hardware across offices, gated societies and commercial premises in Dehradun, with particular attention to fail-safe and fail-secure configuration on fire-exit routes. He's completed eSSL and ZKTeco product training and personally signs off on every multi-door and boom barrier installation.
Page last reviewed and updated January 2025. Pricing and product availability are checked periodically and may change without notice — call ahead to confirm current rates.