Structured cabling, PoE switches and WiFi access point coverage across Dehradun — the underlying infrastructure that determines whether your CCTV app actually loads, your biometric device syncs reliably, and your door phone rings your phone when it should.
⚡ Quick Answer
SR Solution handles networking and WiFi setup in Dehradun from around ₹2,000 for a basic router configuration, with structured office cabling typically ₹15,000 to ₹40,000 depending on cable points. The site visit is free, camera and device traffic gets segmented from general use where it matters, and equipment is genuine D-Link, TP-Link or Ubiquiti. Call +91 78179 50541 to arrange a visit.
✦ What comes up most often
At a Glance
| Coverage | Homes, offices and commercial premises across Dehradun |
| Networks set up | 165+ since 2018 |
| Typical response | Same-day to next-day site visit |
| Starting price | ₹2,000 for a basic router setup |
| Install duration | A few hours for basic setups; longer for structured cabling |
| Equipment used | D-Link, TP-Link, Ubiquiti |
| Testing | Every point tested for actual signal/connectivity before handover |
| Rating | 4.6 / 5 average |
| Hours | Monday–Saturday, 7:00 AM – 9:00 PM |
The Basics
Networking infrastructure — cabling, switches, WiFi access points, router configuration — is what every other system in this business actually runs on top of. A perfectly installed camera with poor WiFi coverage still shows up as "offline" in the app; a well-configured biometric device still fails to sync payroll data over a congested network. This is the layer that's easy to overlook because when it's working, nobody thinks about it at all.
Usually only when something else seems broken — a camera that "keeps going offline," a biometric device that "won't sync," a door phone that "doesn't ring on my phone reliably." Often the device is fine and the network underneath it is the actual problem.
Keeping camera and device traffic on a separate network from general browsing prevents one from slowing down the other, and adds a real layer of separation between security devices and everyday data — a detail easy to skip but worth doing properly.
Understanding the Infrastructure
Properly planned, labelled cable runs to fixed points, rather than an ad-hoc tangle added device by device. More relevant for offices and larger homes than a single small flat.
Delivers power and data through one cable, meaning a camera or access point doesn't need a separate power outlet nearby — a real simplification for ceiling or outdoor-mounted devices.
Additional units extend coverage into dead zones without necessarily replacing the main router — common for larger homes, multi-floor offices, or buildings with thick walls.
Keeping camera and device traffic separate from general internet use, so one doesn't slow down or compromise the other — standard practice rather than an unusual extra step.
Common Situations
Before You Book
① A "Broken Camera" Is Often a Network Problem
Before assuming a camera itself has failed, checking the network it's connected to — signal strength, bandwidth, whether it's congested with other traffic — often finds the actual cause and avoids an unnecessary camera replacement.
② Plan Cabling Before Walls Are Finished
For any new construction or renovation, running structured cable before plastering is far cheaper and tidier than retrofitting later — this is worth raising early with a contractor if a CCTV or networking upgrade is even a possibility down the line.
| Timing | Approach |
|---|---|
| Pre-construction | Cable runs planned into walls |
| Already finished | Surface trunking or WiFi-based alternative |
③ Segment Security Devices From General Use
Camera and biometric traffic on its own network segment prevents heavy device bandwidth from slowing everyday browsing, and keeps security devices meaningfully separated from general data — worth asking for specifically if it's not mentioned upfront.
④ Test Coverage, Don't Assume It
Wall thickness, building materials and interference all affect real WiFi coverage in ways a floor plan alone can't predict — an actual signal test at the property is what determines whether one access point is enough or more are genuinely needed.
Related Services
All available from a single visit alongside networking work.
Network capacity and PoE switches planned alongside camera placement for reliable remote access.
DetailsNVR systems in particular depend on solid network infrastructure for remote viewing to work reliably.
DetailsMobile app remote answering depends entirely on a reliable network connection for the panel.
DetailsNetwork infrastructure can be included in an ongoing maintenance contract alongside other systems.
DetailsWhat Things Cost
Final cost depends on property size and cable points — confirmed after a free site visit.
| Service type | Typical scope | Price range |
|---|---|---|
| Basic router setup | Configuration, security, testing | ₹2,000 – ₹5,000 |
| Additional access point / mesh unit | Per unit, coverage extension | ₹3,000 – ₹6,000 |
| Multi-access-point WiFi coverage | Larger home or office, 2-4 units | ₹8,000 – ₹18,000 |
| PoE switch installation | Sized to camera/device count | ₹4,000 – ₹12,000 |
| Structured cabling, office | Per cable point, labelled & tested | ₹15,000 – ₹40,000 |
| Annual Maintenance Contract | Network checks, any brand | From ₹2,500/year |
* Figures are indicative as of 2025 and include standard installation. A written, itemised quote follows the free site visit.
How It Works
Basic setups are usually completed within a few hours.
Call or WhatsApp with the property size and what needs reliable connectivity — cameras, devices, general use, or all three.
A technician walks the property, checking existing coverage and identifying dead zones or bandwidth bottlenecks.
An itemised quote follows, covering cabling, access points, switches and router configuration as needed.
Cable runs, PoE switches and access points are fitted according to the agreed plan.
Router and network settings are configured, with camera or device traffic segmented from general use where appropriate.
Every point is tested for actual signal and connectivity before the technician leaves, with a walkthrough of the setup.
Worth Comparing
| Feature | SR Solution ✦ | Typical vendor |
|---|---|---|
| Camera/device traffic segmentation | ✔ Standard practice | ✘ Often skipped |
| Site visit cost | ✔ Free | ✘ Often charged |
| Actual signal testing, not assumed | ✔ Every point tested | ✘ Often assumed adequate |
| Branded equipment only | ✔ | ✘ Sometimes unbranded |
| Written, itemised quote | ✔ Always | ✘ Verbal estimate |
| AMC available | ✔ Yes | ✘ Rarely offered |
In Their Words
4.6 out of 5, from clients across Dehradun.
"Thought our camera was faulty since it kept showing offline. Turned out to be the WiFi signal at that end of the house — added an access point and it's been solid since."
"Structured cabling for our new office, planned properly before the walls went up. Everything labelled and tested, none of the usual mess of extension cables."
"Had them separate our cameras onto their own network segment from our office WiFi. Small thing but made sense once explained, and things run smoother now."
Questions That Come Up
General questions about networking and WiFi setup in Dehradun.
Lead Installation Technician, SR Solution
Sandeep has spent the last seven years setting up networking and WiFi infrastructure across homes and offices in Dehradun, with particular attention to the connectivity that CCTV, biometric and door phone systems actually depend on for their remote-access features to work reliably. He personally tests every access point and cable run before calling a job complete.
Page last reviewed and updated January 2025. Pricing and product availability are checked periodically and may change without notice — call ahead to confirm current rates.